Festo MPA Series - Page 51

1. Summary of components
1−33
Festo P.BE−MPA−EN en 0910d
You will find the following electric connecting and display
elements on the pneumatic components of the MPA−S valve
terminal with CPX terminal or CPI module:
1
23
4
6
5
1
3
1
Inscription fields
2 Optional pressure sensor (only for
MPA−S with CPX terminal):
LEDs of the pressure sensor
seeFig.1/16
3 LEDs on the valve: on the MPA1 a dual
col o ur LED/valve; on the MPA2 two
LEDs/valve:
yellow: Signal status display
of the pilot solenoids
red: Error status
4 Optional additional electrical
supply:
green power LED
5 Optional proportional−pressure
regulator (only for MPA−S with
CPXterminal):
LEDs of the proportional pressure
regulator see Fig.1/17
6 Optional additional electrical
supply:
Valve load voltage connection
Fig.1/15: Electric connecting and display elements of the MPA−S valve terminal with CPX
terminal or CPI module