2. Parameters of the SPC11 for the DGP(I)(L)-...
2-7
Festo P.BE-SPC11 -DGP-EN en 0012NH
The parameters listed in the following tables are adapted
exactly to the specified combinations of valves, drives, mass
loads and fitting positions.
Please note
Faultless operation can only be guaranteed if all compo-
nents are fitted correctly.
S Use only the specified combinations of valves, drives
and mass loads.
S Observe the installation instructions in chapter 1 as well
as in the System manual.
S Make sure that the drive and the measuring system are
fitted symmetrically and free of play.
To Next Page
Loading...
