Fibocom L850-GL - 4.3 Transmitting Power

Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
L850-GL Hardware User Manual Page 45 of 54
Operating Band Description Mode Tx (MHz) Rx (MHz)
BeiDou - - / 1561.098±2.046
4.3 Transmitting Power
The transmitting power for each band of the L850 module as shown in the following table:
Mode Band 3GPP Requirement(dBm) Tx Power(dBm) Note
WCDMA
Band 1 24+1.7/-3.7 23.5±1 -
Band 2 24+1.7/-3.7 23.5±1 -
Band 4 24+1.7/-3.7 23.5±1 -
Band 5 24+1.7/-3.7 23.5±1 -
Band 8 24+1.7/-3.7 23.5±1 -
LTE FDD
Band 1
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 2
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 3
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 4
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 5
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 7
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 8
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 11
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 12
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 13
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 17
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 18
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 19
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 20
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 21
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 26
23±2.7
23±1 10MHz Bandwidth, 1 RB
Band 28 23+2.7/-3.2 23±1 10MHz Bandwidth, 1 RB
Band 30
23±2.7
22±1 10MHz Bandwidth, 1 RB