Fidelity Electronics 19eA - Page 10

13. Zero Indicator
Visible when instrument is at zero status.
14. Net Indicator
Visible when net result is being displayed.
15. Weight (kg) / Stable Indicator
Visible when weight unit is = kg.
• Flashing = Weight unstable
• Lit on = Weight stable
16. Weight (g) / Stable Indicator
Visible when weight unit is = g.
• Flashing = Weight unstable
• Lit on = Weight stable
17. Weight (lb) / Stable Indicator
Visible when weight unit is = lb.
• Flashing = Weight unstable
• Lit on = Weight stable
18. Count Function Indicator
Visible when instrument is in Piece Count mode.
• PCS Indicator only = Value being displayed is number of pieces.
• PCS Indicator + any Weight Indicator = Value being displayed is unit piece weight.
19. M+ Indicator
Visible when memory contains of accumulated data.
20. Lo Battery Indicator
• Flashing: - Battery level is low. Apply power adaptor to recharge battery as soon as possible.
• Lit on: - Battery level is at extreme low. Apply power adaptor to recharge battery immediately otherwise instrument
will power off automatically shortly.
21. LO Light Bar
7
Visible when check result is = LO.
22. OK Light Bar
Visible when check result is = OK.
23. HI Light Bar
Visible when check result is = HI.
7
Light Bar is only visible when Check Function is employed.