58
11. Double click on the preferred data source
to which variant(s) has/have to add.
(a) check the box below External
Keyboard, then
(b) enter the appropriate command on the
Prompt Box (refer to 16.2.1 for
command detail).
12. Select Auto on the Source box under
Template Field
13. Repeat point 11 to ~ 12 for all other data
sources.
14. Click OK.
15. Click Export. In case of Verification
Messages appear, select one of method on
the dialogue box to fix and click Continue.
E.5 Sample Label
Sample label (for TSC printer) on right is available for download at: -
www.fi-measurement.com/resource/driversnsoftwares
To Next Page
Loading...