Fidelity Electronics 19eA - Ios and Android Apps; Connecting Transmission Devices to Instrument; Running App on a Smart Device

To Next Page

To Previous Page

14.7 iOS and Android Apps

iOS and Android Apps are available to work with this instrument. They can be download at: -

• iOS App is named i19. Visit App Store and search for i19 or Fidelity Measurement.

• Android App is named a19. Visit Google Play and search for a19.

These 2 Apps support both Bluetooth and WIFI connection.

14.7.1 Connecting Transmission Devices to Instrument

1. Transmission devices for App (Bluetooth / WIFI / LAN) should be connected to Comport 2.

2. Then go to F17 and select CMD, then select baud rate, parity and data length. Baud rate, parity and

data length settings should be the same as the setting of the transmission devices. Baud rate 115200

or higher is recommended.

14.7.2 Running App on a Smart Device

1. Download App from App Store or Google Play. Refer to 14.7 for more information.

2. Power on instrument and transmission device.

3. Start running App on Smart device.

• For connection via WIFI, select WiFi Connection on App screen, then enter IP and Port number of the

transmission device connected to instrument.

• For connection via Bluetooth, select Bluetooth on App screen, then select the Bluetooth transmission

device connected to instrument.