Fidelity Electronics 19eA - Appendix C: - Operation Result Commands

52
Appendix C: - Operation Result Commands
59
Operation Result commands are those commands which are used to request operation result and details from this
instrument. These commands can be sent to this instrument from computer through any standard communication
program. Command format as below: -
a. Hex code 0D (CR), then
b. Hex code 0A (LF) then
c. Command code listed on below command table, then
d. Space (Hex code 20).
Refer to below table for commands details.
Operation Result Commands Table
Prompt
Command
60
Description
a
Peak Value
b
Product Code
c
Total accumulated pieces
d
Machine ID
e
Machine Group Number
f
Operator Number
g
Customer Code
J
Current status, weight and tare weight values
K
Date
L
Time
M
No. of accumulated transaction
N
Total accumulated weight
n
Total accumulated weight without unit or decimal
O
Net weight
o
Net weight without unit or decimal
P
Tare weight
p
Tare weight without unit or decimal
Q
Gross weight
q
Gross weight without unit or decimal
R
HI limit
S
LO limit
T
Comparison Result
U
Number of piece
V
Average piece weight
Y
Weight hold
y
Weight hold without unit or decimal
Z
Read internal count (AD) value
59
Connect the external peripheral which generates operation result commands to Comport 2 and set Comport 2 to CMD.
60
Prompt commands are case sensitive.