TWINFLEX
®
pro² Control Panel Engineering and Commissioning Manual
36
.
The Active Log will display any current faults. These are displayed in
text format and may be scrolled through by pressing the UP and
DOWN keys. Press the ESC key to exit the menu.
The Active Log will display any current disables. These are displayed
in text format and may be scrolled through by pressing the UP and
DOWN keys. Press the ESC key to exit the menu.
The Active Log will display any current warnings. These are displayed
in text format and may be scrolled through by pressing the UP and
DOWN keys. Press the ESC key to exit the menu.
The Test Display function causes LCD screen to blacken and the test
LED to illuminate.
The Test LEDs function causes the panel LEDs to toggle on/off to
ensure correct operation. When this option is active, the test light will
be illuminated.
The Test Buzzer function toggles on and off to ensure correct buzzer
operation unless the buzzer has been disabled by fitting a jumper link
to LK1 on the PCB. The test light will illuminate while this action is
taken.
To Next Page
Loading...
