Table of Contents
Industrial Dynamics Company, Ltd. Document 40274-0600 V
Error Number 54 4-9
Error Number 58 4-10
Error Number 61 4-10
Error Numbers 64 4-10
Error Number 66 4-10
Error Number 67 4-10
Error Number 68 4-10
Error Number 72 4-10
Error Number 86 4-11
Error Numbers 92-100, 99, 100, 111-114, 116 4-11
Error Number 117 4-11
Error Number 118 4-11
Error Number 119 4-11
Error Number 120 4-11
Error Number 121 4-11
Error Number 123 4-11
Error Number 124 4-12
Error Number 125 4-12
Error Number 126 4-12
Troubleshooting Procedures 4-13
Is the power turned on 4-13
Is the power filter circuit breaker tripped 4-13
Is the X-ray Source Function enabled 4-13
The display does not respond when keys are pressed 4-13
The display shows a blinking cursor and the beacon is on 4-13
There is no display and the beacon is off 4-14
The display is garbled or operates erratically 4-14
False triggers or reject timing malfunctions are occurring 4-14
No triggering occurs 4-14
The rejector does not function 4-15
All containers are rejected 4-15
The rejector is operating erratically 4-15
The rejector arm is sticking or binding 4-16
The rejector arm remains extended 4-16
Rejected container trajectory is sloppy or inconsistent 4-16
Chapter 5: Maintenance Procedures
Maintenance Schedules 5-3
Daily Maintenance 5-3
Weekly Maintenance 5-3
Monthly Maintenance 5-3
120 Day Maintenance 5-4
Maintenance Procedures 5-5
Trigger Beam and Emitter Lenses 5-5
High Cap/Bulged Lid, Missing Cap/Lid, Down Container, and Smashed
To Next Page
Loading...