Fimap BMg Series - Lubrication Points; Work Requirements

7.3 Lubrication Points
For lubrication use standard grease.
 Lifting Lever
 Bushings and Pins
7.4 Work requirements
The Vacuum unit only works if the following conditions are met:
1. The batteries are not discharged.
2. The operator is seated on the machine so as to press the
seat safety switch (1).
3. The machine is on (2).
4. The electrobrake is activated.
5. The functions setting on the display is Drying or Washing
+ Drying (3).
6. The accelerator pedal is pressed(4).
82