Fimap BMg Series - Adjustments; Disassembly

Floater microswitch (FLR)
The Floater microswitch by means of the lever, indicates when the water level is at critical level of overflow or
empty in the case of recycling system (optional).
Flashing light
The flashing light always active when the machine is on, has the function of facilitating its visibility.
7.7 Adjustments
7.7.1 Squeegee
The Squeegee Support has to be adjusted with the Squeegee fitted
on, lowered on the floor and vacuum system on. The goal of the
adjustment is to let the squeegee blade be angled 45 degrees to
the floor for its whole length.
To obtain the correct adjustment act on the squeegee wheels
adjusting knobs (A) to adjust the distance from the floor, and
on the central adjusting knob (B) to adjust the inclination of the
squeegee.
Procedure:
Switch the machine ON and lower the squeegee to the floor.
Slowly advance by pressing the traction pedal.
During the advancement, adjust the squeegee via the knobs so
as to obtain an inclination of the squeegee rubbers of 45 degrees
(A) on the floor throughout their length.
7.8 Disassembly
7.8.1 Squeegee Support
Lower the squeegee and turn the machine Off.
Remove the squeegee from its support.
Remove the shackle of the chain (A) and the snap ring to remove
the pin (B).
86