EN
83
7.2.2.1 STEP 1 - Administrator/User login credentials
• Set the Administrator account user and password (minimum 8 character for
password):
Administrator account can open and view the contents of
photovoltaic site. Additionally, they can change inverter settings.
User and password are CASE SENSITIVE.
• Set the User account user and (optional) password (minimum 8 character
for password):
User account can only read data. It cannot make any changes.
User and password are CASE SENSITIVE.
• Click on “NEXT” to go to next step.
7.2.2.2 STEP 2 (Optional) - Wireless network connection.
As described on “Ethernet connection” paragraph the recommended way to get all the installed inverters communicating to the
internet and Aurora Vision Cloud is creating a wired Ethernet daisy chain bus. Anyway, in case of a few inverters installation in suitable
environment, it is also possible to connect each inverter of the plant to a Wi-Fi router without using any cable.
Aurora Vision Plant Viewer™
Aurora Vision Plant Viewer for Mobile™
Aurora Vision Plant Portfolio Manager™
Customer SSID
IP given by router
DHCP server
IP given by router
DHCP server
Direct Access
SSID: ABB-XX-XX-XX-XX-XX-XX
(XX-XX-XX-XX-XX-XX= Inverter MAC address)
PVS-120.0
- The AP is still available and the user can connect to the inverter.
- In this scenario the Router gives IPs according to its own rules.
- Inverter is reachable by IP.
- Domain name can be used only if the Router permits multicast
To Next Page
Loading...
