To Next Page

To Previous Page

Cyclic Delete ATT Data

You can set the device to delete a number of records when its storage is full. The value

range is from 1 to 999 records. For example, you can set the value at 500 records and the

device will delete the first 500 records to free up the space to store new records.

Cyclic Delete ATT Photo

You can set the device to delete a number of stored photos when its storage is full. The

value range is from 1 to 99. For example, you can set the value to 50 and the device will

delete the first 50 photos to free up slots to store new images.

Conrm Screen Delay(s)

You can set the time delay for the device to display verification results (ID, name and

photo). The time range is from 1s to 9s.

Save Illegal Verication Record

You can set a time range to allow employees to verify for access, for example from 9:00

am to 6:00pm. Employees will be able to verify at the device before and after this time

range, but no access will be granted. However the device will record the employees ID

and attempted time of access. You can set the device to ignore these records to save

storage.

Expiration Rule

You can set limits for the device to verify an employee, either by number (for example

100 times) or specific date (for example 1st of June). Employees exceeding the limit can

no longer verify at the device or gain access. You can set the device to take any of the

action below when the limit has been reached:

• Keep User, No Audit Future Punch: Device keeps employee data but will not save any

attendance records.

• Keep User, And Audit Future Punch: Device keeps employee data and attendance

records.

• Delete User: Device removes all employee data

FingerTec TA100C User Guide

Other manuals for FingerTec TA100C