Installation Instructions
16.1.09 Panda_6000i_System_eng_s01835.book.R01 - Chapter C: Installation Instructions Page 47
C.8 Generator AC system installation
ATTENTION! Before the electrical system is installed, READ the SAFETY
INSTRUCTIONS of this manual FIRST! Be sure that all electrical installations
(including all safety systems) comply with all required regulations of the regio-
nal authorities. This includes lightening conductor, personal protection switch
etc.
All electrical safety installations have to be made on board.
Required cable cross-sections
The following recommended electrical cable dimensions (cross sections) are the minimum requi-
red sizes for a safe installation. (see section F.2, “Technical data,” on page 74)
Fig. C.2: Electrical installation - example
1. Generator
2. Electrical fuel pump 12VDC
3. PMGi 6000 inverter
4. iControl panel
5. Starter battery 12VDC
To Next Page