Panda iControl
Page 90 - Chapter A: Panda iControl Panel_iControl_eng.fm
Fischer Panda Datasheet
A.9 Technical data
A.9.1 Intended use
The Panda iControl is a part of the Panda i-series generator. It is not allowed to use the iControl at other genera-
tors or applications.
The iControl must be connected with the electronic board at the generator.
Attention! See also the safety instructions in the generator and the PMGi manual. The
rules of the respective regional authority must be adhered to. Only an electrician may
carry out installation of the electrical connections for safety reasons.
To Next Page