Maintenance Instructions
Page 66 Panda_6000i_System_eng_s01835.book.R01 - Chapter E: Maintenance Instructions 16.1.09
E.7.3 Replace the impeller
1. Close the raw water valve.
Fig. E.7.3-1: Raw water valve
2. The raw water pump is located on the
front side of the genset.
Fig. E.7.3-2: Raw water pump
3. Remove the cover of the raw water
pump by loosen the screws from the
housing.
Fig. E.7.3-3: Cover raw water pump
To Next Page