Maintenance Instructions
16.1.09 Panda_6000i_System_eng_s01835.book.R01 - Chapter E: Maintenance Instructions Page 55
Oil Filter Change
The oil filter can be loosened by means of
an oil filter strap.
Fig. E.2.1-4: Oil filter change
Oil filter gasket
The gasket should be coated with oil
before inserting the new oil filter.
Tighten the oil filter by hand only.
Fig. E.2.1-5: Oil filter gasket
Refill Oil
New oil is poured in, after opening the cap
of the oil filler neck. Please wait a
moment, before measuring the oil level;
the oil must first settle in the sump.
Fig. E.2.1-6: Oil filler neck
To Next Page