Fläkt Woods 8666 GB 2010.06
Specifications are subject to alteration without notice
Installation and maintenance instructions
Control equipment
3
Procedure 2
Control panel, sizes 0.55–5.5 kW 4
Control panel, size 7.5 and 11–15 kW 5
Electrical connection for Norway 6
Connecting the service power supply for lighting 7
Connecting the energy analyser 10
Cable dimensions and currents, 0.55–15 kW 10
Power consumption eQ 11
Connecting sensors and accessories 12
Lighting control in the control panel 13
Connection power supply lighting 13
Fitting cable truning 14
Electrical connection of units in blocks 15
Connection board 16
Temperature sensor 17
Pressure/flow sensor 18
Configuration of the sensor 19
Zero calibration 19
k-factors 19
Temperature correction 19
CO
2 sensor 20
Damper actuators 21
Filter monitors 23
Fan monitors 23
Timer, push button, motion detector and
CO
2 monitor 24
External Timer 24
Push button 24
CO
2 monitor 25
Motion detector 26
Heating coil 27
Cooling coil 27
Heat exchanger 28
Permissible mounting methods 29
Frost protection sensor 29
Electric heating 30
Output and current for electric heaters 32
Minimum flows for duct-mounted electric heater 33
Minimum flows for air handling unit-mounted
electric heater EQEK 33
DX cooling 34
Z sensor 34
ECONET
®
35
Preheater 36
Temperature zones and external fans 37
Fire protection unit and/or external stop 38
Operation of fans in the event of fire 39
Connecting external components in
the control panel 40
Connecting components in the junction box 41
Using the controller 42
Updating SD cards 43
Menu navigation 43
Overview of the menu structure 46
Activating control functions 47
Questions and answers 48
Alarm guide 50
Contents
To Next Page
Loading...
