Flashforge DREAMER - Loading Models in FlashPrint; 6.2.3 Loading

Flashforge Corporation
Dreamer User Guide | www.flashforge.com
31
6.2.3 Loading
You can load a model file or Gcode file into your FlashPrint by the following six
methods:
Method 1: Click the [Load icon on the main interface. Then select the object file.
Method 2: Select the file for loading and drag the file to the main interface of the
software.
Method 3: Click [File]--[Load File]. Then select the object file for loading.
Load files.
Enter the support edit mode
View FlashPrint home screen from one of six viewing angles.
Move model around on XY-axis; shift+click to move along Z axis
Turn and rotate your model
Scaling the size of your object
Cut the model into several parts
Print it directly with your Dreamer or export to SD card.
Select right or left extruder you want to print with.