Flashforge DREAMER - Support Settings; 6.2.10 Supports

Flashforge Corporation
Dreamer User Guide | www.flashforge.com
39
6.2.10 Suppor ts
After loading the model, click [Edit]--[Supports] or click the Suppor ts icon directly,
then you will enter the support edit mode (6-11). Click [Back] to exit when you finish
editing.
6-11
①Support Options
Click the Support Options, an option box will appear, supports options include
“treelike” and “linear”, when choose “treelike”, click [OK], then it will generate
treelike structure; when choose “linear”, click [OK], then it will generate linear
structure; if it is a model with supports, when you choose one of the supports options,
software will judge whether existing supports need to be deleted or not on the basis of
the type of existing support, and will pop up the corresponding prompt to let you
make the choice.