Flashforge DREAMER - Speed, Temperature, and Other Settings; • Speed; • Temperature; • Others

Flashforge Corporation
Dreamer User Guide | www.flashforge.com
43
● Speed
a. Print Speed is the moving speed of the extruder. Generally, the lower speed
is, the better print you will get. For PLA printing, 60 is recommended.
b. Tr avel Speed is to control the moving speed of the extruder under
non-printing status during work. For PLA printing, 80 is recommended.
Note: Modify parameters settings to get better prints as different models need
different parameters.
● Temper atur e
Right Extr uder Temper atur e: Recommended extruder temperature is 220℃.
Note: Different temperatures have subtle influences in printing. Please adjust the
temperature according to the condition in order to get a good print.
Platform Temperatur e: To set the temperature of Platform.
● Other s
Cooling Fan Control: Set up the time to turn on the cooling fan. You can
pre-set the height and make the cooling fan begin to work at the point.
Pause At Heights: Allow users to pre-set a height in which the print will
suspend automatically. The function usually applied when you want to change the
filament at a certain point.
(5-7) Click[Edit], then you can add or remove a height.
6.2.12 File Menus
① New Project
Click [File]--[New Pr oject] can build a blank project. If there is an unsaved
modification on previous project, then it will inform you whether the modification
6-15