Flashforge DREAMER - WiFi and Pulley Settings; WiFi: Turn on the WiFi:; Pulley: To select the equipped pulley type.; Status: It displays the real-time status...

Flashforge Corporation
Dreamer User Guide | www.flashforge.com
60
WiFi:
Turn on the WiFi: Turn on the WiFi,
release the WiFi hotspot and set the
WiFi on computer
Backg
Pulley:
To select the equipped pulley type.
Status:
It displays the real-time status of the
extruder temperature, the platform
temperature and the internal
temperature.
About:
It displays the basic information about
the device.