Flashforge DREAMER - Page 65

Flashforge Corporation
Dreamer User Guide | www.flashforge.com
66
9.Turn off password lock:
After password lock setting is completed,
Tap the [Passwor d lock] button, then
Tap the [off] button. Enter the old valid
password on the touch screen, password
lock function will be turned off, password
lock status changed from [Enable] to
[Disable].
10.Turn on password lock again:
After password lock setting is completed
and password lock status is [Disable]:
Tap the [Passwor d lock] button, then
Tap the [on] button, Enter the old valid
password on the touch screen, password
lock function will be turned on again,
password lock status changed from
[Disable] to [Enable].
Note: After password lock setting is
completed and password lock status is
[Enable]. Restart the printer and enter the
new valid password on the touch screen.
You are not allowed to use the printer if
you can not enter the correct valid
password.Please well keep your
password, If you can not use the printer
due to forgetting password, please contact
FlashForge to get help.