Inventor User Guide | www.flashforge.com 0086‐ 0579‐82273989
47
（
Surface to Platform 6-18
）
⑧
Auto Layout All
Click [Edit]--[Auto Layout All] after loading one or more than one models, all
models will be placed automatically as automatic placement rule.
6.2.14 Print Menus
①
Connect Machine
You can connect the Inventor with your PC via a USB cable or WIFI.
Note: The machine icon on the bottom right displays the connection status:
Connected
Disconnected
Method 1
：
Connect Via USB Cable
a. Connect your Inventor with your PC via an USB cable.
b. Turn on your Inventor and start Flashprint.
c.Click [Print]--[Connect Machine], then select USB in the [Connection Mode]
option and select machine you want to connect in [Select Machine] option. If you can
To Next Page
Loading...
