Flexim FLUXUS G601 - Shear Wave Transducer Specifications

B Technical Data FLUXUS G60x
UMFLUXUS_G6V4-2EN, 2011-03-29 197
Shear Wave Transducers
technical type GDG1NZ7 GDK1NZ7 GDM1NZ7 GDP1NZ7
order code GSG-NNNNL GSK-NNNNL GSM-NNNNL GSP-NNNNL
transducer
frequency
MHz 0.2 0.5 1 2
medium pressure
1
min. extended metal pipe: 20 metal pipe: 20 metal pipe: 20 metal pipe: 20
min. metal pipe: 30
plastic pipe: 1
metal pipe: 30
plastic pipe: 1
metal pipe: 30
plastic pipe: 1
metal pipe: 30
plastic pipe: 1
inner pipe diameter d
2
min. extended 250 70 30 15
min. recom-
mended
380 80 40 20
max. recom-
mended
810 500 80 40
max. extended 1100 720 120 60
pipe wall thickness
min. 14 5 2.5 1.5
max. ----
material
housing PEEK with stain-
less steel cap
304 (1.4301)
PEEK with stain-
less steel cap
304 (1.4301)
stainless steel
304 (1.4301)
stainless steel
304 (1.4301)
contact surface PEEK PEEK PEEK PEEK
degree of protec-
tion according to
EN 60529
IP 67 IP 67 IP 67 IP 67
transducer cable
type 1699 1699 1699 1699
length 5 5 4 4
dimensions
length l 129.5 126.5 60 60
width b 51513030
height h 67 67.5 33.5 33.5
dimensional
drawing
operating temperature
min. °C -40 -40 -40 -40
max. °C +130 +130 +130 +130
temperature
compensation
xxxx
1
depending on application, typical absolute value for natural gas, nitrogen, compressed air
2
shear wave transducers: 
typical values for natural gas, nitrogen, oxygen, pipe diameters for other gases on request
pipe diameter min. recommended/max. recommended/max. extended: in diagonal mode and for a
flow velocity of
bar
bar
mm
mm
mm
mm
mm
mm
m
mm
mm
mm
l
h
b
h
b
l
15 m/s