114 UMFLUXUS_G6V4-2EN, 2011-03-29
FLUXUS G60x 16 Libraries
16.1.1 Data Retention During the Partitioning of the Coefficient Memory
When the coefficient memory is repartitioned, max. 8 data sets of each type can be re-
tained.
16.2 Input of Material/Medium Properties Without the Extended
Library
To enter the material/medium properties as constants, the extended library must be de-
activated.
The properties of a user defined material/medium can be entered now.
Enter the number of the user defined materials. Press EN-
TER.
Enter the number of the user defined media. Press EN-
TER.
The occupancy of the coefficient memory is displayed for a
few seconds.
Select yes to start the partitioning. Press ENTER.
The coefficient memory will partitioned accordingly. This
procedure takes a few seconds.
After the partitioning, Format USER-AREA is displayed
again.
example 1: The number of user defined materials is reduced from 5 to 3. The data sets
#01 to #03 are retained. The data sets #04 and #05 are deleted.
example 2: The number of user defined materials is increased from 5 to 6. All 5 data
sets are kept.
Select Special Funct.\SYSTEM settings\Librar-
ies\Extended Library. Press ENTER.
Select off to deactivate the extended library. Press EN-
TER.
Format USER-AREA
Materials: 03
Format USER-AREA
Media: 03
FORMATTING ...
...
Libraries ↕
Format USER-AREA
Libraries ↕
Extended Library
Extended Library
>OFF< on
To Next Page
Loading...
Need help?
General
