70
10 Start-up
10.4 Language Selection
The transmitter can be operated in the languages listed below. The language can be se-
lected with the following HotCodes:
Depending on the technical data of the transmitter, some of the languages might not be
implemented.
When the last digit has been entered, the main menu will be displayed in the selected
language.
The selected language remains activated when the transmitter is switched off and on
again. After a cold start, the default language set by the manufacturer is activated.
Tab. 10.1: Language HotCodes
909031 Dutch
909033 French
909034 Spanish
909044 English
909049 German
To Next Page
Loading...
