10 Start-up
67
10 Start-up
10.1 Switching on/off
Press key BRK three times to switch off the transmitter.
10.2 Displays
10.2.1 Main Menu
The selected program branch is displayed in capital letters between arrows. The com-
plete designation of the selected program branch is displayed in the lower line.
Select a program branch by pressing key and . Press ENTER.
Press key C to switch on the transmitter.
After the transmitter has been switched on, the display in-
dicates which transducer has been detected at which
channel.
Afterwards, the serial number of the transmitter is dis-
played for a short time.
Data can not be entered while the serial number is dis-
played.
After the initialization, the main menu is displayed in the
selected language. The language of the display can be set
(see section 10.4).
The main menu contains the following program branches:
• par (Parameter)
• mea (Measuring)
• opt (Output Options)
• sf (Special Function)
Note! By pressing key BRK, the measurement will be stopped and the
main menu selected.
Note! In this user manual, all program entries and keys are indicated with
typewriter characters (Parameter). The menu items are separated
from the main menu by a backslash "\".
FLEXIM FLUXUS
G60X-XXXXXXX
>PAR<mea opt sf
Parameter
>PAR<mea opt sf
Parameter
To Next Page
Loading...
