Flintec FT-112 - Page 63

FT-112(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019 Page 62 of 170
[
37-
IDENTIFICATI
]
IDENTIFICATION DATA
Press key or key again to enter this menu.
Press key to return to beginning of the sub-block or press
key to enter the next main block.
[
371
NAMEDIS
:
TEMP
]
Identification name is displaying after pressing ID key.
NO
YES
TEMP
:
:
:
Identification name is not displayed.
Identification name is displayed until pressing
enter or any alphanumeric key.
ID data is displayed after announcing identification
name 2 seconds.
[
372
ID1NAME
:
ID 1
]
Identification name entry of ID1 key
Page 41
Maximum 16 characters. Default is ID 1.
[
373
ID1 LINK
:
NO
]
Linked memories to ID1 memory
Page 77
NO
SET
PT
SP
:
:
:
:
No any linked memory.
Set memory
PT memory.
SET and PT memories.
[
374
ID2NAME
:
ID 2
]
Identification name entry of ID2 key
Page 41
Maximum 16 characters. Default is ID2.
[
375
ID2 LINK
:
NO
]
Linked memories to ID2 memory
Page 77
NO
SET
PT
SP
:
:
:
:
No any linked memory.
Set memory
PT memory.
SET and PT memories.