FLIR A500 Series User Manual

RTSP Streams
9
It is possible to establish streaming sessions with the Smart Sensor, the Advanced Smart
Sensor, and the Advanced Image Streaming cameras of the FLIR A400/A500/A700
series.
The following URLs can be used:
• rtsp://<IP>/avc/
• rtsp://<IP>/mpeg4/
• rtsp://<IP>/mjpg/
• rtsp://<IP>/avc/ch1
• rtsp://<IP>/mpeg4/ch1
• rtsp://<IP>/mjpg/ch1
The section after IP address refers to the encoding:
• /avc = H264 encoding
• /mpeg4 = MPEG4 encoding
• /mjpg = Motion JPEG encoding
The section after the encoding refers to the source, which can be either / or /ch1:
• / will start a streaming session giving you the identical video as seen in the web inter-
face. This can be IR, visual, MSX, or FSX, and the feed is 640 x 480 pixels.
Add the &overlay=off argument in the URL to receive a feed without overlay.
• /ch1 will start a streaming session giving you the uncropped visual image at 1280 x
960 pixels.
A radiometric 16-bit stream is also available for software supporting it.
#T810409; r. AH/78915/78915; en-US
16

FLIR A500 Series Specifications

General

Brand	FLIR
Model	A500 Series
Category	Thermal cameras
Language	English