Camera web interface
10
10.4.5.1 Palette
You can change the palette that the software uses to display the different temperatures
within an image. A different palette can make it easier to analyze the image. The most
suitable palette for a certain application depends on many different factors, such as the
target temperature and emissivity, the ambient temperature, and the distance to the tar-
get. You will need to test different palettes in order to find the one that best suits your
application.
To change the palette, follow this procedure:
1. On the toolbar and in the Data presentation modes, click Palette.
2. Select one of the available palettes.
10.4.5.2 Isotherms
By using color alarms (isotherms), anomalies can easily be discovered in an infrared im-
age. The isotherm command applies a contrasting color to all pixels with a temperature
above, below, or between the set temperature levels.
The camera supports the following isotherms:
• Above
Applies a contrasting color (red) to all pixels with a temperature above the specified
temperature level.
• Below
Applies a contrasting color (blue) to all pixels with a temperature below the specified
temperature level.
• Interval
Applies a contrasting color (yellow) to all pixels with a temperature between two speci-
fied temperature levels.
#T810409; r. AH/78915/78915; en-US
27
To Next Page
Loading...
Need help?
General
