Accessing the CM-3102 via a Web Browser
Ariel CM-3102 User and Installation Guide
Events Handler
The Events Handler tab is used for configuring settings for the various methods used for event
notification. The tab includes the following screens:
6.3.1.6.1 Email
It is possible to send notifications to up to 10 email addresses.
Note:
Before configuring email settings, check that:
There is an SMTP mail server on the local area network (LAN).
The network is connected to either an intranet or the Internet.
TCP/IP settings, including DNS Server settings, are configured in the Network > General
screen.
To configure email settings
Select the Email tab. The Email screen is displayed.
Figure 78: Events Handler > Email Screen
In the Basic Settings area, configure the following settings:
Authentication – From the drop-down list, select one of the following authentication
methods:
No_Auth – No email authentication method is used. This is the default setting.
SMTP Plain – PLAIN is the least secure of all the SASL (Simple Authentication
and Security Layer) authentication mechanisms because the password is sent