Saving and working with images
11
11.2.2 Procedure
Follow this procedure:
1. To save an image, pull the trigger.
Note Depending on the settings in (Settings) > Save options & storage, the following
may happen:
• A preview image is displayed before the image is saved.
• An annotation tool or the annotation menu is displayed when the image has been
saved.
11.3 Previewing an image
11.3.1 General
You can preview an image before you save it. This enables you to see if the image contains
the information you want before you save it. You can also adjust and edit the image.
Note The camera must be configured to display a preview image before saving. Select
(Settings) > Save options & storage > Preview image before saving = On.
11.3.2 Procedure
Follow this procedure:
1. To preview an image, pull the trigger. This displays the preview.
2. Manual image adjustment mode is now active, and the status icon
is displayed.
For image adjustment instructions, see section 13.3 Adjusting the infrared image, page
60.
#T810190; r. AI/41890/41890; en-US
51
To Next Page
Loading...
Need help?
General
