Changing settings
21
21.1 General
You can change a variety of settings for the camera:
• Regional settings, such as language, date, time, etc.
• Camera settings, such as digital camera color, display intensity, etc.
• Preferences, such as user-configurable buttons, image overlay information, text size,
etc. Here you can also set the camera to stamp the temperature scale into the image.
• Camera information, such as serial number, part number, used and free memory, etc.
No changes are possible here, only presentation of information.
21.2 Procedure
Follow this procedure to change settings:
1. Turn the mode wheel to
to enter setup mode.
2. Move the joystick left/right to go to the desired tab.
3. Move the joystick up/down to select the desired menu item.
4. Push the joystick. This will highlight a setting (or display a submenu, depending on the
context).
5. Move the joystick up/down to change the setting.
6. Push the joystick to confirm the choice.
7. (To close a submenu, push the
button.)
8. To leave the setup mode, turn the mode wheel and select another mode.
21.3 Connecting the camera using a peer-to-
peer (ad hoc) WLAN network
21.3.1 General
You can set up a peer-to-peer (ad hoc) WLAN network in order to let other devices con-
nect to the camera.
Note
• This procedure shall be used when connecting the camera to Apple iPhone and iPad
apps that are developed by FLIR Systems.
• The command Wi-Fi settings will only be available when a WLAN SD-Card, a USB-
WLAN micro adapter, or a USB Wi-Fi micro adapter is inserted into the camera.
21.3.2 Procedure
Follow this procedure:
1. Insert a USB Wi-Fi micro adapter into the camera.
2. Turn on the camera.
3. Turn the mode wheel to
.
4. In the toolbox, select Camera.
5. Under Wi-Fi, change the setting to Connect to device.
#T559157; r. AH/45951/45951; en-US
70
To Next Page
Loading...
