Changing settings
21
6. Under Wi-Fi settings, take note of the SSID parameter.
This is the unique identifier of the network and will be displayed in the list of available
devices when you have set up the other device for WLAN communication.
7. Set up your other device for WLAN communication and select the camera (i.e., its
SSID name).
21.3.3 Related topics
For locations of camera buttons, see 12 Camera parts, page 29.
21.4 Connecting the camera using a
infrastructure WLAN network
21.4.1 General
You can set up a infrastructure WLAN network in order to communicate with other devices.
Note
• This procedure shall be used when connecting the camera to Android apps that are de-
veloped by FLIR Systems.
• Android phones and tablets can also be set up as Wi-Fi hotspots, to which you can con-
nect the camera in the same way as you connect to a WLAN. Refer to the user docu-
mentation for your Android phone/tablet for more information.
• The command Wi-Fi settings will only be available when a WLAN SD-Card, a USB-
WLAN micro adapter, or a USB Wi-Fi micro adapter is inserted into the camera.
21.4.2 Procedure
Follow this procedure:
1. Insert a USB Wi-Fi micro adapter into the camera.
2. Turn on the camera.
3. Turn the mode wheel to
.
4. In the toolbox, select Camera.
5. Under Wi-Fi, change the setting to Connect to WLAN.
6. Under Wi-Fi settings, select the network that you want to connect to.
7. Set up your other device to connect to the WLAN network and select the camera (i.e.,
its SSID name).
21.4.3 Related topics
For locations of camera buttons, see 12 Camera parts.
21.5 Changing Wi-Fi settings
21.5.1 General
If you experience transmission or interference problems, you may need to change the Wi-
Fi settings in the camera.
21.5.2 Procedure
Follow this procedure to change Wi-Fi settings:
#T559157; r. AH/45951/45951; en-US
71
To Next Page
Loading...
Need help?
General
