FLIR GF320 - Installing and removing the camera battery

Handling the camera16
16.2 Installing and removing the camera battery
16.2.1 Installing the battery
Note Use a clean, dry cloth to remove any water or moisture on the battery before you
install it.
16.2.1.1 Procedure
Follow this procedure to install the battery:
1. Push the release button for the battery compartment upwards.
2. Open the battery compartment cover.
3. Push the battery into the battery compartment.
4. Close the battery compartment cover.
#T559157; r. AH/45951/45951; en-US
47