Changing settings
21
1. Turn the mode wheel to
.
2. In the toolbox, select Camera.
3. Select Wi-Fi settings and push the joytick.
4. To select a different channel, use the joystick. Push the joystick to confirm each choice.
You can use channels 1 to 11. However, since the channels overlap, only channels 1,
6, and 11 are normally used.
5. In the other device, refresh the list of devices and try to connect to the camera again
6. To confirm and leave the dialog box, push the
button.
Note The command Wi-Fi settings will only be available when a WLAN SD-Card, a
USB-WLAN micro adapter, or a USB Wi-Fi micro adapter is inserted into the camera.
21.5.3 Related topics
For locations of camera buttons, see 12 Camera parts.
#T559157; r. AH/45951/45951; en-US
72
To Next Page
Loading...
