Technical data22
22.20 FLIR GF320 14.5°
P/N: 44401-0101
Rev.: 45202
General description
The FLIR GF320 is an infrared camera for optical gas imaging (OGI) that visualizes and pinpoints leaks
of methane and other volatile organic compounds (VOCs), without the need to shut down the operation.
The portable camera also greatly improves operator safety, by detecting emissions at a safe distance,
and helps to protect the environment by tracing leaks of environmentally harmful gases.
The FLIR GF320 is used in industrial settings such as oil refineries, natural gas processing plants, off-
shore platforms, chemical/petrochemical industries, and biogas and power generation plants.
Benefits:
• Improved efficiency: The FLIR GF320 reduces revenue loss by pinpointing even small gas leaks
quickly and efficiently, and from a distance. It also reduces the inspection time by allowing a broad
area to be scanned rapidly and without the need to interrupt the industrial process. The wireless con-
nectivity of the camera allows you to connect to smart phones or tablets for the wireless transfer of im-
ages or remote control of the camera. The FLIR GF320 is also used for temperature measurement,
which makes it even more useful for predictive maintenance.
• Increased worker safety: OGI allows gas leaks to be detected in a non-contact mode and from a safe
distance. This reduces the risk of the user being exposed to invisible and potentially harmful or explo-
sive chemicals. With a FLIR GF320 gas imaging camera it is easy to scan areas of interest that are dif-
ficult to reach with conventional methods. The camera is ergonomically designed, with a bright LCD
and tiltable viewfinder, which facilitates its use over a full working day.
• Protecting the environment: Several VOCs are dangerous to human health or cause harm to the envi-
ronment, and are usually governed by regulations. Even small leaks can be detected and documented
using the FLIR GF320 camera.
Detects the following gases: benzene, ethanol, ethylbenzene, heptane, hexane, isoprene, methanol,
MEK, MIBK, octane, pentane, 1-pentene, toluene, xylene, butane, ethane, methane, propane, ethylene,
propylene.
Licensing and classification
License information Interchangeable lens version of the FLIR GF3XX
series requires US Department of State License
and will be subject to limitations on resale, except
inside US. Allow a minimum of 90 days after appli-
cation submittal for approval.
Imaging and optical data
IR resolution 320 × 240 pixels
Thermal sensitivity/NETD <15 mK @ +30°C (+86°F)
Field of view (FOV)
14.5° × 10.8°
Minimum focus distance 0.5 m (1.64 ft.)
Focal length 38 mm (1.49 in.)
Lens identification Automatic
F-number 1.5
Focus Automatic (one touch) or manual (electric or on the
lens)
Zoom 1–8× continuous, digital zoom
Digital image enhancement Noise reduction filter, high sensitivity mode (HSM)
#T559157; r. AH/45951/45951; en-US
163
To Next Page
Loading...
Need help?
General
