Handling the camera16
1. Align the index mark on the lens with the index mark on the bayonet ring.
2. Carefully push the infrared lens into the bayonet ring.
3. Rotate the infrared lens 30° clockwise (looking at the front of the lens).
16.11 Removing an infrared lens
Note
• Do not touch the lens surface when you remove an infrared lens. If this happens, clean
the lens according to the instructions in 25.2 Infrared lens, page 229.
• When you have removed the lens, put the lens caps on the lens to protect it from dust
and fingerprints.
• Depending on license and export procedures, lenses may be permanently fixed to cam-
eras shipped to customers outside United States. Interchangeable lenses fall under U.
S. Department of State jurisdiction.
16.11.1 Procedure
Follow this procedure to remove an infrared lens:
1. Push the release button for the infrared lens forward.
#T559157; r. AH/45951/45951; en-US
53
To Next Page
Loading...
Need help?
General
