User Interface Menus
5
Figure 5.31 Enabling/Disabling the Laser pointer and the Worklight
• Auto Power OFF (APO): Set APO to a time value of 5, 10, 20, or 30 mi-
nutes. Set to OFF to disable APO.
Figure 5.32 Setting the Auto Power Off (APO) utility
• Reset options: Access this menu to reset the MR265 to factory default
conditions, to format (erase) the internal image memory, and to perform a
PIN Calibration. To recover from a MR265 crash (display freezes), press
and hold the UP and DOWN arrows for >10 seconds, until the MR265 re-
boots. No data will be lost by running this procedure.
Figure 5.33 Reset options screen
• Set Device Settings to Factory Default: Select RESET to perform the re-
set, or select CANCEL to abort.
#NAS100070; r. AB/77165/77326; en-GB
22
To Next Page
Loading...
