User Interface Menus
5
Figure 5.29 Setting the Date and Time
• Screen Brightness: Set the screen brightness as shown in the screen im-
ages below.
Figure 5.30 Setting the Screen Brightness
• Lamp and Laser Enable/Disable: Enable or disable both the Worklight
and Laser pointer. When enabled, press and hold the Worklight button
to
turn the Worklight ON or OFF. When enabled, press the Laser button
to
turn the Laser pointer ON (release the button to turn it OFF).
#NAS100070; r. AB/77165/77326; en-GB
21
To Next Page
Loading...
