User Interface Menus
5
• Device Settings: Use the Device Settings menu to set the following pa-
rameters: Language, Date & Time, Screen Brightness, Lamp (Worklight) &
Laser pointer, Auto Power Off, and Reset (factory default reset, internal
memory formatting, and PIN calibration). These are explained below.
• Language selection: Use the navigation arrows and Select button
to
choose the desired display language.
Figure 5.28 Local language selections
• Date and time setting: Set the year, month, day, hours, and minutes.
#NAS100070; r. AB/77165/77326; en-GB
20
To Next Page
Loading...
