34
12 O’clock set – Allows the operator to change the offset setting for the
host platform Az icon (Compass Rose).
Date and time – Allows the operator to set the correct Date and time
display.
NOTE:
The term “Advanced mode” refers to a mode where the
Centroid tracking modes are made available to the user. If
the Advanced mode is off (not selected) the menu options
for these modes are not present at the Tracker Mode switch.
Advanced mode is selected from the Initial setup menu.
Advanced mode (Auto-tracker options – basic [ ] or complete [a])
Advanced mode [ ] (default)
Allows access to the two basic Auto-Tracker modes through the Auto-
Tracker Mode Switch. The Tracker Mode Switch is used to step through
and select one of the two basic tracker modes.
Phase Correlation Mode (PCORR)
Scene Lock Mode (SCENE)
Advanced mode [a]
Allows access to all Auto-Tracker modes. The Tracker Mode Switch is
used to step through and select one of the six tracker modes.
1. Phase Correlation Mode (PCORR)
2. Scene Lock Mode (SCENE)
3. Centroid Statistical Mode (CENT STA)
4. Centroid White Mode (CENT WHT)
5. Centroid Black Mode (CENT BLK)
6. Correlation Mode (CORR)
Platform type Æ – Selects menu to choose host platform type for
azimuth indicator display.
Hardware config Æ – Selects menu to choose installed GPS
equipment.
Clear agency – Clears agency name field.
Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
CM Ref:4049
Valid on Day of Issue only.
Document will not be updated
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard
To Next Page
Loading...
Need help?
General
