33
3.2.2 Initial Setup Menu
This Initial setup Menu (Figure 3-10) allows the Operator to ‘personalize’
the SeaFLIR II Imaging System with a variety of functions selectable
through the HCU.
Figure 3-10. Initial Setup Menu
Factory defaults setting (restore option). Returns the system to the
following factory default settings.
Auto-null [ ] Symbology level full
SG Reverse [ ] Color scheme 0
Auto-slew [b]
12 O’clock (no offset)
Advanced mode [ ] (off) PCORR (Tracker mode)
Helicopter
Agency name – Allows operator set Agency name or other identifying
information into the display.
Symbology level Æ – Selects menu to setup initial settings
Color scheme Æ – Selects menu to choose display graphic color
settings.
Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
CM Ref:4049
Valid on Day of Issue only.
Document will not be updated
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard
To Next Page
Loading...
Need help?
General
