49
f. The first character position of the Agency name field will be
highlighted.
g. Use the ZOOM Rocker Switch to select the first character.
h. After the first character is set, use the FOCUS Rocker Switch to
step to the next position (up to 19 character positions).
i. Repeat steps g. and h. above to select and change each
character.
j. When Agency name setup is complete, press the EXIT Switch
twice to finish and resume normal operation.
Figure 3-31. Agency Name Setup and Edit Display
3.6.2 Date and Time Setup
The Date and time field displays Date and time information (Figure 3-32)
on the SeaFLIR II Imaging System video display.
The Date and time field setup using the following procedure:
a. Press MENU Switch.
b. Scroll through the Top-level menu to Initial setup.
Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
CM Ref:4049
Valid on Day of Issue only.
Document will not be updated
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard
To Next Page
Loading...
Need help?
General
