64
b. Use the Strain Gauge point the SGA (camera lens).
c. Press ZOOM Rocker Switch to operate the IR camera Zoom lens.
d. Proper manual focus is achieved by adjusting the Zoom Rocker
Switch to the Narrow Field Of View (NFOV) and focusing on the
target. As the zoom is moved to the Wide Field Of View (WFOV),
the target should remain in focus. When using Auto-Focus (default)
this step would be skipped.
3.14 Operating the CCD Camera
Unless otherwise noted, refer to Figure 3-1 for CCD camera operation.
a. Press the CCD-IR Switch to select the CCD camera. The image on
the display will show which camera is selected.
b. Use the Strain Gauge to point the SGA (camera lens).
c. Press ZOOM Rocker Switch to operate the CCD camera Zoom lens.
d. Roper manual focus is achieved by adjusting the Zoom Rocker
Switch to the Narrow Field Of View (NFOV) and focusing on the
target. As the zoom is moved to the Wide Field Of View (WFOV),
the target should remain in focus. When using Auto-Focus (default)
this step would be skipped.
To return to the IR camera press the CCD-IR button.
Commercial in Confidence
Export Level 2
Issued to: AgustaWestland
CM Ref:4049
Valid on Day of Issue only.
Document will not be updated
Uncontrolled : 4256
Retrieval Date:07-Dec-10
Requested by Bower, Richard
To Next Page
Loading...
Need help?
General
