CHAPTER 3
Operating the Standalone Pump
Basics of pump control
There are three types of screens: main control screens,
pump status screens, and pump configuration screens.
The configuration screens are where all operating configu-
ration changes are made, using the touch keys on the
screen. Other screens are for displaying data to indicate
how the pump is running; no changes can be made to the
pump from these screens.
Main control screens
•
Start
•
Main Run
•
Change Pressure Setpoints
•
Dual Pressure Control
•
Boost Pump Control
Pump status screens
•
Pump Status 1
•
Pump Status 2
•
Analog Input Status
•
Pump Shutdowns
•
Pump Warnings
Configuration screens
•
Configuration screen 1
•
Configuration screen 2
•
Configuration screen 3
•
Configuring the clock
•
Defaults
•
Display Services
Units
Note that the units in the screens in this chapter are
PSI for pressure measurements, and °F for tempera
-
ture measurements. These units can be changed to
Bar for pressure, and °C for temperature; see the
Defaults screen.
© Flow International Corporation M-390 | 21
To Next Page
Loading...
