FLOWBIRD STRADA PAL - Page 114

STRADA PAL – MAINTENANCE MANUAL
114/149
8.6.3 Replacing the collection lock of the collection rack
8.6.3.1 Preliminary operations
A. Ask a collection operator to perform a collection.
B. Turn off the terminal
C. Remove the collection drawer
8.6.3.2 Replacement
A. Unscrew the nut (1) that holds the lock assembly (2).
B. Remove the lock assembly (2).
C. Loosen the 2 screws (4).
D. Remove the lock assembly (3).
Replacing the mechanical lock of the collection rack
8.6.3.3 Installation
Before fixing the lock, insert the key and center the lock inside the lock hole in the
housing.
A. Repeat the previous steps in reverse.
8.6.3.4 End of procedure
A. Place the collection drawer
B. Turn on the terminal
C. Close the maintenance door