STRADA PAL – MAINTENANCE MANUAL
115/149
8.6.4 Replacing the protective flap of the collection trapdoor
8.6.4.1 Preliminary operations
A. Ask a collection operator to perform a collection.
B. Turn off the terminal
C. Remove the collection drawer
D. Disassemble the lock assembly
8.6.4.2 Replacement
A. Remove the protective flap (1) of the stud (2) located on the equipment, by
loosening the screw with an Allen key.
Replacing the protective flap of the collection trapdoor
8.6.4.3 Installation
A. Repeat the previous steps in reverse.
8.6.4.4 End of procedure
A. Assemble the lock assembly
B. Place the collection drawer
C. Turn on the terminal
D. Close the maintenance door
To Next Page
Loading...