STRADA PAL – MAINTENANCE MANUAL
42/149
Correcting paper jams in the printer (1/4)
H. Clean the print head with a cotton swab moistened with isopropylic alcohol (5).
I. Clean the printer roller with a dry cloth (6).
Correcting paper jams in the printer (2/4)
J. Put the print head back in place (7).
K. Put the paper guide back in place, carefully sliding the paper roll slightly on the left
(8).
Correcting paper jams in the printer (3/4)
L. Put the paper guide notch at the bottom left (9).
To Next Page
Loading...